You've put your new car through a coin op car wash? Numerous times?? My WRX will never experience the harshness of that. :sadwave:


Anyways, try this: Hand wash your car with a good car soap and microfiber wash pad. Then if it's still there, do a few passes over the area (not just the stain) with a claybar. Apply some pressure here, as I'm guessing the stain you talk of is treesap or the like. Be sure to apply a coat of wax -to the entire car of course- afterwards.

I doubt SoA would cover this if you happened to buy the car without the residue. That would be like asking them to cover your tires after having driven them for a while- it is sort of a wear and tear item.

 

Thanks Pactin,

Yea I just thought it was wierd how the residue appeared out of nowhere. It could possibly be tree sap. Someone mentioned that it could be the residue coming from the plastic wrap that they put on the car during transport. But whatever it is, I jus want to get rid of it.

As for the coin op thing, it's my only option for washes. Drive through car washes are out of the question. Im going to try Googone first and if that doesn't work, I may have to bring it to professional for advice. It's too cold to claybar right now.

 

Sure its not a bird crap spot? I have 1 or 2 spots that chewed up my paint. Try the clay-bar approach and finish up with a little polish/wax.

The clay bar kit is easy and can be done in a short amount of time and even though it's cold you should be able to suck it up for a couple minutes to try to rub the spot off. Just clean the area of paint you are going to be working on (Using provided microfiber cloth and the detail mist spray) and then use the clay as directed

 

Is it tree sap, can you feel it when you rub your finger over it? Have you looked into trying to hand wash your car, use a claybar and follow that up with a nice, high quality wax / polish?

 

Someone O-faced your car in the middle of the night.

:whoa::whoa::whoa::whoa::whoa:

I'd take it as a compliment

 

If its tree sap try some original pinesol on a rag and wip it on the sap put a little elbow grease into it it should come off

 

Wish I had seen this thread sooner. :redface:

Claybar.



Not sure I would want to use that.

 

use lacquer thinner. Dab it on a Microfiber cloth, use 2 fingers and rub lightly one direction. Your problem will be fixed in about 2 minutes.

Claybar will scratch your paint, and aside from everyone being scared to death to use thinner on their cars, DONT BE. if you use it right there will be no damage to your paint and you will be happy. I have 2 years automotive detailing experience, i work at a local detail shop, I see your problem all the time.

 

claybar scratches? do tell..

I find that a little hard to believe since for years and years now its been a proven method of removing light blemishes/contaminants. I imagine using one without following the directions will certainly do damage... but otherwise, I'd really like to hear your stance on this. Not being an ass, seriously want to know. My wrx is black, already has factory installed swirl marks. :sadwave:

 

My wrx is black, already has factory installed swirl marks. :sadwave:

Use an orbital buffer at about 5k rpm with a good nanowax, Carbrite.com has Nanowax its about the best you can buy.

If that doesnt solve your problem, bring out the rotational buffer,foam pad and some Crystal Shine polish. if you are not familiar with buffing DO NOT ATTEMPT.

 

Where i work, we only use claybar for things like overspray or before applying Strikeforce, Anything thats not visible that will make your paint rough to the touch. Tree sap on the other hand, is visible, and yeah claybar will probably take it off but i sure wouldn't try it... especially not on black..