[chudlo]

I just put the stock sedan rear swaybar on and it hangs much lower than the stock wagon one.

Is this normal?
Did I mess up something?
Here is a picture.... I hope....



Thanks for the help.

chudlo

 

[djrez4]

hey...all you did was rotate the sway bar down. the bar should be positioned so that the top end of the link is attached to the sway bar instead of the bottom like you have. just loosen the bolts, rotate the links up so they look like C's (and backward C's)

 

[djrez4]

http://www.mrtrally.com.au/performance/PHOTO/mrt199.jpg

i know it's a picture of a MRT link, but the concept is the same. the sway bar should be above the lower swingarm on the suspension...i'd be better at explaining this, but i'm a bit tipsy

 

[chudlo]

Dooohh!

Thanks djrez4,

I was hopping that was all. I feel like a big noob.


Thank you again,

enjoy being tipsy.


chudlo

 

[Eskram]

That's how it should look. It shouldn't take but 5 minutes to correct.

 

[djrez4]

eskram!! get rid of those RE92's!!

 

[chudlo]

eskram...

Thanks for the pic. I just did the fix after work. It took me a while. I had trouble getting to the passenger side support.

Oh well, it is done.

Now to relearn how to handle this car.

Now if I could only afford some sticky tires.....


chudlo