Subaru WRX Forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
I have just purchased an Alpine 10" R series sub and a Kenwood 250Watt RMS amp... but I need a box to put the sub in.

I don't want to spend a lot on the box. I've already spent too much on my audio, and I just want something simple.

Will someone please tell me what I should get, and where I should get it from:confused:

The specs on the sub call for 0.5-0.8cf of air-space.

Thanks in advance.

-Spencer
 

·
Registered
Joined
·
1,637 Posts
With my old car...I had 2x12" 1000W Double magnet subs. My enclosure was +1cf/side, but I got the box cheap. It was a 3/4 width of whatever type of wood and it sounded good...

Go ON EBAY ! I got it cheap. But do some research first...
 

·
Registered
Joined
·
8 Posts
Just build it...

Go to the lumber store and get the materials, cut it... and then you good to go. It's not that hard. I've built many different styles of boxes.

If you want a design, talk to me. All you need is a radial-saw, a drill, a saber-saw, screws, caulk, and some time. Not difficult at all.

E-mail me if you have any ?'s.
 

·
Registered
Joined
·
38 Posts
Discussion Starter · #4 ·
Thanks for the suggestions...

I would have built my own, but I found a great deal on E-Bay.

Again, Thanks for the help.
 

·
Registered
Joined
·
137 Posts
if your curious and want to build your own, its not hard... but the wood that RLsChMiDt was talkin about is 3/4" MDF.... but if you found a good deal, go for it.. i built a box for my boy for like 30 bucks.. for 2 12's...
 

·
Registered
Joined
·
424 Posts
Same here... well, I'm almost done, just need to carpet it. Holds 2 12"s with a smidge over 1.5cu. ft. per side.

-Jason
 
1 - 6 of 6 Posts
Top