Subaru WRX Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
12,314 Posts
It takes up water, which could potentially boil and make a bubble that would cause your brakes to get soft. That is pretty extreme though. The moisture could also affect brake parts.

I just did the fluid on my bike - I had assumed the PO had kept up with it somewhat, but I literally had to wipe goo out of the reservoir.

I find the hardest part of the process is finding some tubing that will fit over the bleeder. If you don't have an assistant etc. you can probably just crack one open and let it gravity feed for a while (keeping a good eye on the reservoir).
 
1 - 1 of 1 Posts
Top