ClubWRX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
112 Posts
Discussion Starter #1
I had asked a week or so ago about wheels, and had come to the decision of going with a set of Enkei RPM2 18x7.50 with 225/40/R18 tires on them. (+50mm BS)


My question now is, i was looking at possibly getting some stiffer springs, and had come across the Eibach Pro Kit. (http://www.jscspeed.com/wrx/suspension/eibach_ls.htm).

I noticed it drops it 1.3" in the front and 1" in the rear. I was curious if this is going to cause any rubbing issues were i to install these wheels/springs.
 

·
Moderating on the run!
Joined
·
12,477 Posts
The Eibach's are pretty mild in the drop dept, so shouldn't be an issue- especially w/ a sedan. Wagon could possibly run into issues (but still think you'd be OK).

Big Sky
 

·
Registered
Joined
·
112 Posts
Discussion Starter #3
Hey thanks for the info, i just realized i suck at life and forgot to mention it would be on an 05' WRX Sedan.

Sorry to bother again, but i just thought about the camber. Should i purchase a set of adjustable caster/camber plates?
 
1 - 3 of 3 Posts
Top