ClubWRX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
179 Posts
Discussion Starter #1
The wait list on the AccessPORT right now is pretty ridiculous, and I'm an impatient person. I am also, unfortunately not mechanically inclined. If I wanted to put a VF34 in, along with STi injectors, would I be able to drive the 30 or so miles back to my house from the shop without damaging anything? This way I could simply send my ECU in for a $20 buck reflash at Cobb, instead of waiting forever for an AccessPORT. I'm guessing probably not, so I should probably order the damn thing now. Anyway, thanks.

Troy
 

·
Registered
Joined
·
465 Posts
From what I have heard your car wouldn't run or run well with the injectors in. You can bolt up the turbo though. I installed my VF34 without the injectors. You can run about 12-13psi safely without the new injectors.
 

·
Registered
Joined
·
1,328 Posts
Just keep the boost low and keep it below 5000 rpm. The ECU will stay in closed loop mode and should compensate for the added flow of the injectors. But after 5000rpm it goes into open loop mode and will run pig rich.
 
1 - 3 of 3 Posts
Top