ClubWRX Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
390 Posts
Discussion Starter #1
TurboXS Tuner Lite, Racing Brake front and rear slotted rotors, Carbotech Bobcat pads and Motul fluid! The brakes will be installed tomorrow and the Tuner hopefully sometime this weekend. Does anyone have a place you would recommend to get a WBO2 bung welded to a downpipe?
 

·
Banned
Joined
·
8,368 Posts
Downpipe would be rough. Try the midpipe before the cat. I don't think you want it right after the turbo.
 

·
Registered
Joined
·
390 Posts
Discussion Starter #6
Zem said:
Downpipe would be rough. Try the midpipe before the cat. I don't think you want it right after the turbo.
Jermaine at TurboXS recommended putting it in the same are as the rear O2 sensor which is near the end of my downpipe (Invidia).
 

·
Registered
Joined
·
1,584 Posts
Zem said:
Downpipe would be rough. Try the midpipe before the cat. I don't think you want it right after the turbo.
It doesn't really matter as long as it's before the cat. If you want to go crazy the best place is in the header on the leanest piston.
MCL
 
1 - 8 of 8 Posts
Top