ClubWRX Forum banner

1 - 11 of 11 Posts

·
Banned
Joined
·
115 Posts
Discussion Starter #1
Last night I did some runs with a modded M3 (close to 400 hp)
I met this member from m3forum.com here is t he link of how it all went

down.http://www.m3forum.net/m3forum/showthread.php?p=441622#post441622


AND HERE ARE THE 3 RACES!! PLEASE EXCUSE THE GIGGLING AND EXCITMENT..

http://www.digitalfiends.com/downloads/movies/cars/modded_sti_vs_modded_m3_run1.zip



http://www.digitalfiends.com/downloads/movies/cars/modded_sti_vs_modded_m3_run2.zip



http://www.digitalfiends.com/downloads/movies/cars/modded_sti_vs_modded_m3_run3.zip
 

·
Registered
Joined
·
152 Posts
i dont get how your 270whp sti hangs with a near 400whp m3

and 280km/h is ~170mph, that's really fast for your impreza
 

·
Banned
Joined
·
115 Posts
Discussion Starter #6
Hey well that is what My dyno sheet says..

every dyno is differnt. This M3 had 400 at the crank he says.. read his mods on his sig in the forum.. the link is there.Oh asnd my speedo went passed the 260 kmh the needle went over I have a pic of that
 

·
Banned
Joined
·
115 Posts
Discussion Starter #8
I agree..

He prob just estimates it.. Just like we say a exhaust adds 15 hp blah blah.. He did have a full catback exhaust system and ss pipe and a few other things.. I would say 360-380 at the most ..
 

·
Registered
Joined
·
166 Posts
SubyFi - Yeah, the aftermarket parts can be very expensive. But just to let ya know, all maintenance is covered for free under the warranty. Usually a 4yr/50. Oil changes, brakes (new rotors and pads, they wont turn rotors), belts, etc.... We had a 4yr50 on our 01M5, and got the extended 6yr100, for only $1000. get a few oil changes, rotors, pads etc.. well worth $1000K.
 

·
Registered
Joined
·
51 Posts
that guy does definitely NOT have 400crank hp. when you modify the E46 m3, almost nothing can be done shy of FI to gain good hp and tq figures. not even the 1200 dollar gruppe-m carbon kevlar intake yields 5hp. only thing that bumps the m3 up marginally is the eurobahn software (which raises rev limited to 8250.) how would i know? i have an alpine white 2004 E46 m3. an maintenance isnt all that much. esp if you do your own work. the aftermarket however is another topic :eek3: my rims cost me 800 dollars per for iforged swifts (and these are considered hre knockoffs haha)
 
1 - 11 of 11 Posts
Top