Subaru WRX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
468 Posts
Discussion Starter · #1 ·
So a local Subaru guy threw in these HID ballasts with some fog covers I was buying. Sooo theoretically, would i need projectors and lights to retrofit my current headlights. Also would these ballasts work with JDM HIDs? The ballasts are from theretrofittingsource.com. Basically I'm asking what can i do with these things?

 

·
Registered
Joined
·
80 Posts
HID specific projectors are generally recommended 'highly' to reduce hot spots and whatnot but I know there are halogen projectors you can get away with very little flare/hotspots but it's not as efficient nor the beam spreading out evenly like the OEM HID's.

Assuming the ballast is still good you would need to get a wiring relay harness that plugs to your headlight bulb of your choice, relays with power & ground wires to complete the circuit.

I'm not too familiar with the Bugeye option but I'm sure if you browse through HIDplanet forum you should find some info.
 
1 - 3 of 3 Posts
Top