ClubWRX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1
I just noticed a cut in one of my vacuum lines while checking my oil.

Its the smaller vacuum line that connects to the 'T' that comes off of the stock bypass valve or BOV. It then runs around to the back of the engine and goes through the firewall.

Does anyone know what this line is for, and what it will affect until I have time to replace it?
Any help at all would be cool.:confused:
 

·
Registered
Joined
·
505 Posts
Sounds like the line for your boost guage. Do you have a stock boost guage? get a coupler and cut out the bad piece of hose and connect the 2 ends with the coupler. You don't want that line leaking.
 
1 - 2 of 2 Posts
Top