ClubWRX Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3,707 Posts
Discussion Starter #1 (Edited)
so im trying to set my boost;
currently im started at
SET;60
GAIN;25
START;11.0

im hitting 17psi t 17.5
but it hits at 4500 rpm? i have an ecutek reflash, what do you guys think i can set my ebc to stop lagging so much, cause they say start controls lag and i dunno what to do! thank you!
 

·
Registered
Joined
·
1,036 Posts
Set the "set" duty cycle until you achieve the desired ammount of boost. Then adjust the gain and start settings so that you get to the desired boost as quick as possible without overboosting or "spiking".
 

·
Registered
Joined
·
3,707 Posts
Discussion Starter #3
chevyeater said:
Set the "set" duty cycle until you achieve the desired ammount of boost. Then adjust the gain and start settings so that you get to the desired boost as quick as possible without overboosting or "spiking".
hmmm true this, can anyone show me #'s i floored my car like 40times today and i feel i raped it just a little to much, i cant be tuning it anymore.

i have
set:60
gain:25
start:11.0

and i achieved 17.7 psi but it doesnt feel like its hitting it all its got!
 

·
Registered
Joined
·
39 Posts
i have mine set 55-15-10.6 and i get 16psi at 2700 rpm with no problems.i have turbo xs stage 2 with their short ram and perrin crank pelley
 
1 - 5 of 5 Posts
Top