Subaru WRX Forum banner
1 - 8 of 8 Posts

·
Moderating U!
Joined
·
4,192 Posts
Discussion Starter · #1 ·
Okay you guys, I need your help. I did a search and cannot find what I am looking for. I need to know if anyone has the part numbers for the 2002 WRX Subaru exhaust gaskets. The ones I need are:

Downpipe to Turbo
Downpipe to Cat
Cat to midpipe
Midpipe to muffler pipe.

I need these ASAP since I am installing my exhaust VERY soon. The most important gaskets are the Downpipe to Turbo & Midpipe to muffler pipe since the other gaskets come with the TurboXS Stealth Back kit I THINK.

Please, I need your help.

Kurlee Daddee
(THE ORIGINAL)
 

·
Moderating U!
Joined
·
4,192 Posts
Discussion Starter · #2 ·
I got these so far. But I still need the:

Downpipe to Cat
Cat to midpipe
Midpipe to muffler pipe.



1. Top Gasket for downpipe 44022AA180 (to turbo)
2. Top Gasket of uppipe 44022AA150 (to turbo)
3. Bottom Gasket of uppipe to manifold 44022AA170
4. Righthand Manifold Gasket to the block 14038AA000

Kurlee Daddee
(THE ORIGINAL)
 

·
Registered
Joined
·
699 Posts
Which gaskets to buy for up-pipe install?

What gaskets are needed to properly install an up-pipe? please list part numbers (if applicable) and location of seller. I'm sure i won't be the only person looking for these answers, so hopefully in future searches this will be more easily found through this thread. So please post some answers. Thanks!
 

·
Moderating U!
Joined
·
4,192 Posts
Discussion Starter · #4 · (Edited)
Here's some more part #'s I have found. Please post if they are right or not.

Midpipe to muffler 44022AA131

Downpipe to cat 44011FE000

Cat to midpipe 44022AA122 (donut looking one?)

And nothing to do with the exhaust but another part #

BOV to inercooler 21896AA072


BLACKSHADOW,
Your part numbers that you need are above.


Kurlee Daddee
(THE ORIGINAL)
 

·
Registered
Joined
·
1,895 Posts
I don't have the part #'s handy - but let's look at what gaskets you would replace in a perfect world:

1. Bypass Valve to Intercooler
2. Turbo to Downpipe
3. Turbo to Uppipe
4. Exhaust Manifold to Cylinder Head (Passenger)
5. Downpipe to Mid-Pipe

These are the gaskets I changed:

1. Bypass Valve to Intercooler
2. Turbo to Downpipe
3. Turbo to Uppipe

I bought these gaskets here:

http://www.subaruparts.com/catalog/?section=170#1388

I haven't had a leak in ~1,500 miles and I attribute that to the fact that I left the turbo to uppipe brackets off during the re-install after being made aware of Pace's resolution.

Good luck! The relatively time-consuming (~4 hours) intall was WAY worth the fast spool and the power increases!
 

·
Moderating U!
Joined
·
4,192 Posts
Discussion Starter · #6 ·
Anyone out there care to share some part # information on this thread. I will rename the thread if it doesn't have to do with Exhaust. I will just call it WRX Part #'s.

I think we need a list of part #'s to make it easier for all of us to order parts if we need to. Especially gaskets. I just don't feel comfortable re-using gaskets.

Please keep the thread alive.

Kurlee Daddee
(THE ORIGINAL)
 

·
Registered
Joined
·
559 Posts
If i have like a complete exhaust,,will i need to use the midpipes gaskets??
i am planning on getting the SS exhaust and going catless..
wich ones would i need???
the 2 from uppipe,1 from turbo to downpipe???thats it??
Thanks
Tuca
 
1 - 8 of 8 Posts
Top