Subaru WRX Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I know the ecu of the 2002 wrx doesn't support dual avcs but would it be able to be run through an aftermarket engine management system or access port? Also if not, would it be necessary to swap the cam and cam gear with non avcs versions or would I be able to just remove and plug the avcs sensor in the heads?
 

· In Æternum
Joined
·
23,698 Posts
Would it be something as simple as a Cobb access port or do you mean like a full stand alone system?
Accessport is only for reprogramming the existing ECU.

You would likely need a full standalone, although some folks back in the day were able to repurpose the TGV control signals for single-AVCS. I don't recall how this was done.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top