Subaru WRX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Awesome DIY, I'm definitely gonna refer to this in the future.

I purchased the Rally Armor Universals and planned on doing a similar DIY sourcing my own hardware and whatnot. One thing I found in my research is that RA designed their hardware such that if the flap gets caught on something it'll rip off without damaging the existing fender holes that are used for mounting. I believe it does this by utilizing hardware with components made out of plastics/rubber, so that they can pull through the flap mounting holes vs the hardware ripping out of the fender.

Worth some thought! I'm thinking of using Nylon bolts with washers or something, so that in theory if they flaps got caught they'd hopefully break the nylon bolts before ripping out the fender holes!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top