Subaru WRX Forum banner
1 - 1 of 3 Posts

· Premium Member
11,374 Posts
Basically, you plug the AP into your OBDII port, follow the instructions, and tell it to flash the desired map to the ECU.. after that you can unplug it, or leave it plugged in to monitor things.

Unfortunately Cobb only makes a stage one map for cars with the CVT because anything beyond that will produce too much power for the transmission to handle. It can barely handle the power the car makes from the factory without breaking... For what it's worth, the stage one plus BigSF intake 93 octane map makes +10% HP / +15% TQ compared to the stock tune.

All of this information (and more) can be found on their website COBB Tuning - Home page
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.