ClubWRX Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Last Friday, when I first tried to install the Rally Armor mud flaps I got from Rally Direct, I broke some of the plastic nut screws. I actually broke the top portion of the screws, but the rest were still stuck in the thread, what should I do? Please advice.
 

·
Premium Member
Joined
·
10,822 Posts
There are no threaded plastic screws,only plastic rivets.If you broke the heads ,just use pliers to yank them out.

And you can get replacements at the dealer.
 

·
Premium Member
Joined
·
10,943 Posts
There are no threaded plastic screws,only plastic rivets.If you broke the heads ,just use pliers to yank them out.

And you can get replacements at the dealer.

There are threaded plastic screws.. kind of. Although the threads are on the inside and the other part threads into them. Like the big ones that hold the carpet down in the front floor boards. What the OP is talking about sounds like the plastic pop rivets though.
 

·
Premium Member
Joined
·
10,822 Posts
On the 2011 in the fenderwell ,all the "screws" are pop out rivets.The center part pops out & you just pull off the rivet.

They are different sizes though,so OP specify which ones you need.

As shown here

 
1 - 6 of 6 Posts
Top