Subaru WRX Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter · #1 ·
I recently rebuild my TD04 and it seemed perfectly fine once it was all together. The wheels spun fine but I can't seem to hit even 1psi on my COBB AP. There's no sounds of grinding or anything when I started it and my AF Ratio is fine also.

Any opinions if Its just a leak or the turbo?
 

·
Super Moderator
Joined
·
10,891 Posts
Who rebuilt the turbo?

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #3 ·
My friend and I rebuilt it. He was the lead on it mostly. He's rebuilt some turbos and motors before.

I just found a rip in the throttle body to intercooler hose too. I'm gonna have to look at the hose connections again knowing that there's a rip there
 

·
Super Moderator
Joined
·
10,891 Posts
Yeah that's a common failure point as is the turbo inlet.

Sent from my SAMSUNG-SM-G935A using Tapatalk
 

·
Registered
Joined
·
41 Posts
Discussion Starter · #5 ·
Yeah that's a common failure point as is the turbo inlet.

Sent from my SAMSUNG-SM-G935A using Tapatalk
I think I just definitely found the culprit. That v Band clamp that clamps the CHRA and Exhaust housing isn't tight enough. I can see the oil drio on the up pipe to turbo flange.
 
1 - 5 of 5 Posts
Top