Subaru WRX Forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
hi guys, i am Jim, i am new to this forum:)
I reflashed my stock 15 wrx MT to OTS stage 1 map about a month ago, the data log shown there are no FBK and FBL but the DAM is not stable when FOT. (forgot when i log the data, but should be about 10-20 kms after reflash) :rolleyes:
Few day ago, i disconnected the battery and the ECU is reset!
I have the ECU reset about 40kms now, when i check the data logs, i found that the DAM is 0.875 stable now (was 1) :shakehead: and there are some FBK and FBL(the value is vary, between -0.xx to -1.4x, and somtime -4xx) :(, i have checked the COBB FQA, but i am still worrying about that. Therefore i have uploaded some datalogs and hope u guys can have a quick look for me please:)
Also, i am thinking if the ECU relearning my driving style?

Thanks for reading this. hope u guys have a nice day:)

This is my data logs and i uploaded to google doc
https://drive.google.com/file/d/0Bz1z0yVp1A2EeUNSZExnOW9TT28/view?usp=sharing
https://drive.google.com/file/d/0Bz1z0yVp1A2EMDFJT0hscHpDS0k/view?usp=sharing
https://drive.google.com/file/d/0Bz1z0yVp1A2EaExtTHBPSGM4SFE/view?usp=sharing
https://drive.google.com/file/d/0Bz1z0yVp1A2ERU1EZ1Vncmo0Rzg/view?usp=sharing
https://drive.google.com/file/d/0Bz1z0yVp1A2EY0VmTmZSNUJrNjg/view?usp=sharing
https://drive.google.com/file/d/0Bz1z0yVp1A2ENzUxejU1UWZ3WE0/view?usp=sharing
https://drive.google.com/file/d/0Bz1z0yVp1A2EbUN3LTc3TlpjNjQ/view?usp=sharing
 

· Registered
Joined
·
2 Posts
Discussion Starter · #2 ·
Just uninstall and install the ap again
the DAM is 1 now:)
and the fbk is gone (-1.4 at the beginning, but always 0)
the fbkL is -1.4 when accelerating, but the value become smaller after 15min drive
Seems like the ECU learned something
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top