Subaru WRX Forum banner
1 - 1 of 1 Posts

·
Premium Member
Joined
·
12,314 Posts
The one I did I put the blocking plate at the valve end for the passenger side. It is still a huge PITA but can be done. I only vaguely remember now but I think the plate was maybe a different part. The link I had posted back then is dead now...

Much more info here -
http://www.clubwrx.net/forums/gener...valve-pump-issue-p0410-p1410-p2431-p2433.html

Edit - oops, I read it again. If you stripped one at the valve end you do have to do the UP. That rubber hose isn't going to cut it.

Maybe cut the hard line and plug it with JB Weld. I'd be worried about the metal shavings getting in the line and possibly the block.
 
1 - 1 of 1 Posts
Top