Subaru WRX Forum banner
slave cylinder
1-3 of 3 Results
  1. Maintenance, service, and repair
    Hello, I was driving my STI Hatch a couple weeks ago and when shifting into 2nd the pedal swung to the floor and stuck. I have already replaced the slave, master and clutch line as the old system ate a seal and so i just replaced the whole system to make my life a lot easier. Me and my cousin...
  2. Transmission & AWD
    i have an 01 Outback (2.5L) The clutch started loosing pressure the more i used it when going a drive. Then the day after, the clutch would feel normal untill i drove for about an hour and it would lose pressure again. I replaced the master cylinder and the issue still continues. The fluid...
  3. Transmission & AWD
    I just installed a stage 3 performance clutch in my 02 wrx. now when i put it in 1st gear and slowly let off the clutch, the whole car starts to shack (almost as if it is going to die) once the trans is fully engaged 1st gear is fine. the same thing happens in reverse. when shifting through the...
1-3 of 3 Results
Top