Subaru WRX Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. General Maintenance, Troubleshooting & Accidents.
    Hello everyone, i need some help with some issues im having with my 2003 wrx 5spd. Bought the car with a bent control arm, put in sti aluminum control arms on both sides with poly bushings, while i was there i also put in brand new inner and outer tie rods, ball joints, end links, and front...
  2. Suspension & Wheels
    I recently got faction fab FL spec coils to go super low and when installing my right axle popped out and I pushed it back in damaging and ultimately had to end up replacing it.. if I keep it that low will I run into axle issues or is there a height that’s recommended
  3. General Maintenance, Troubleshooting & Accidents.
    Hey guys I have a friend with a 2009 wrx and his FR outer cv joint clacks on sharp turns. We replaced it with a new masterpro drive axle and it started making noise after about 20 miles so we warrantied it and again it failed in under 100 miles. I’ve been doing a decent amount of research on...
  4. Suspension & Wheels
    subaru 03 wrx, 160k miles. About a month and a half ago I started hearing a squeaking sound in low speeds (parking lot) from the front (possibly driver's) side of the car. I had to do the maintenance which i took it in to Subaru dealer for and when i picked up th4e car they told me the inner cv...
1-4 of 4 Results