ClubWRX Forum banner

Search results

1-7 of 7 Results
Advanced Search
  1. IF YOU HAVE A MISFIRE CODE ,PLEASE READ THIS!!!

    General Maintenance, Troubleshooting & Accidents.
    I don't know how you would go about it on a '99 WRX. I have an access port which can read the codes. But more than likely your nearest Auto Zone will check your CEL codes for free.
  2. loose belt

    General Maintenance, Troubleshooting & Accidents.
    When I start my 02'WRX cold it has been making a squealing noise lately. It will start squealing after a few seconds and then if I push the clutch in a few times it will usually stop. Then I don't seem to have any problems with it until the next morning when I fire it up again. I was wondering...
  3. IF YOU HAVE A MISFIRE CODE ,PLEASE READ THIS!!!

    General Maintenance, Troubleshooting & Accidents.
    grounding turned out to be the issue I was having problems with my 02 WRX and cyl 3 misfiring. After replacing the spark plugs and running injector cleaner through the system a few times with no positive results, I was about to drop hundreds on new coil packs when I noticed a post about the...
  4. Cyl 3 misfire. Possible causes?

    General Maintenance, Troubleshooting & Accidents.
    It would seem that I have fixed the prob I installed a do it myself grounding kit/mod, and immediately noticed that my car was running smoother, and I haven't had any more problems with cylinder misfires... so far, it has been about 1000 miles since the Mod, and still running smooth. Anyone...
  5. Cyl 3 misfire. Possible causes?

    General Maintenance, Troubleshooting & Accidents.
    I have had a problem with Cylinder 3 missfire on my 02 WRX for a while now. It started happening awhile ago, and every time I would do something like replace the spark plugs, fuel filter, tighten fuel hoses, the CEL would go off and every thing would seem good. Also of note is the first couple...
  6. Is my engine running lean

    Engine Modifications
    I have the capability of data logging. I just need to know what the xx/xx means. In other words what should the ratio be? Is 14/9 too lean? etc.
  7. Is my engine running lean

    Engine Modifications
    I have a Blitz short ram intake, and Borla XR-1 cat back exhaust installed on my '02WRX. Now that I have a Cobb Access Port I can monitor my A/F ratio. I just don't know what the numbers mean. A subaru tec told me I should make sure it was not running too lean. How can I tell?
1-7 of 7 Results
Top