ClubWRX Forum banner

Search results

1-20 of 187 Results
  1. 2006 WRX with Cobb Stage 1+ EBCS boost go / no-go

    Engine Modifications
    Do you honestly think what you posted is readable? Help us help you. Use Google Doc or the like to host the file then post the link here. I would also go to Cobb's website and read some info about making a "good" datalog as well. No need to waste time uploading it to Good Docs and linking back...
  2. My 1st turbo!

    Tuning: Electronic Engine Management
    Start with the FAQ's/Sticky's. http://www.clubwrx.net/forums/engine-modifications/134325261-first-modifications-what-do-not-do.html The 2016's are not much different modding wise than the previous generations.
  3. Misfire on all 4 cylinders?

    Engine Modifications
    http://www.clubwrx.net/forums/general-maintenance-troubleshooting-accidents/134337553-if-you-have-misfire-code-please-read.html
  4. ECUflash (or ECUedit) cant read ROM, getting frustrated with Openport

    Tuning: Electronic Engine Management
    Big thing is just make sure you are using the 32bit version of Java. Or just use the AZ1G401V Rom for modifying.
  5. ECUflash (or ECUedit) cant read ROM, getting frustrated with Openport

    Tuning: Electronic Engine Management
    Did you read the Romraider FAQ's? You have to tell Romraider where you put the definitions. Also you need to list what operating system you are using on your laptop.
  6. Need help with CEL codes P0171 and P0301-4

    General Maintenance, Troubleshooting & Accidents.
    http://www.clubwrx.net/forums/general-maintenance-troubleshooting-accidents/134337553-if-you-have-misfire-code-please-read.html P0171 CEL Thread - Everything you ever wanted to know? - NASIOC
  7. lights lights & more lights!

    Tuning: Electronic Engine Management
    Why are you desperate if: 1. Your car is driving fine/drive-able 2. You still have a warrenty The Cobb AP has never been that great of a OBDII scanner. Try using a dedicated CANBUS OBDII scanner. They can show you pending codes,readiness monitors and sometimes when the code became active (in miles)
  8. Where the heck can I buy this fuel filter?

    General Maintenance, Troubleshooting & Accidents.
    The second one my be a superseded part for the first.
  9. ProcessWest TMIC vs Grimspeed TMIC. 2013 WRX

    Engine Modifications
    Yup. The company on Ebay was calling themselves "XS Turbo" hence the confusion I guess.
  10. Stage 2+ 350/380HP?

    Tuning: Electronic Engine Management
    Why don't you check Cobb's website?
  11. lights lights & more lights!

    Tuning: Electronic Engine Management
    And you have what vehicle? Personally I would replace with Denso or NGK/NTK.
  12. Where the heck can I buy this fuel filter?

    General Maintenance, Troubleshooting & Accidents.
    Why is it when I Google search the part number 42072AA121 I can find about a hundred places to buy it for around $22?
  13. Where the heck can I buy this fuel filter?

    General Maintenance, Troubleshooting & Accidents.
    Why not? Sent from my iPhone using Tapasquak
  14. lights lights & more lights!

    Tuning: Electronic Engine Management
    The rear 02 sensor heater circuit is bad. Just Google search "P0037" Sent from my iPhone using Tapasquak
  15. Coolant system issue, any help would be GREAT THANKS!

    General Maintenance, Troubleshooting & Accidents.
    The overflow line will never be pressurized per say. The radiator fans cool the car at idle. Why did you start a new thread? Should have just continued with the original one so others will know what has been suggested and what has been tried.
  16. Installing NGK Iridium plugs? Check the gap. Really.

    General Maintenance, Troubleshooting & Accidents.
    The issue is most people that have never gapped a plug before, or have just done copper plugs, use a tool like such.
  17. OPENSOURCE TUNING: Your questions answered here!!! RomRaider + Tactrix

    Tuning: Electronic Engine Management
    I have been using the PLX Kiwi 2 for several years along with a ton of other people on the forum. The $20 generic ELM327 work just as well I have used both Torque and Dash Command Apps. Reading data and resting the ECU is one thing. Reflashing the ECU is a little more difficult. A lot of this is...
  18. how do i make a recirculating line for boost.

    Engine Modifications
    You just need the factory recirculating line and possibly the BPV elbow. It attaches to the turbo inlet pipe. It's probably still there and just blocked off.
  19. To Accessport or not to Accessport?

    Tuning: Electronic Engine Management
    Good luck. Look closely at "Figure 7" on that report. Notice they use "relativity safe AFR" to describe the fueling. It goes from a 10:1 AFR stock in open loop fueling to almost a 12:1 in open loop fueling. You do understand the ECU only makes direct corrections in closed loop fueling right?
  20. Rack and pinion

    General Maintenance, Troubleshooting & Accidents.
    You have to remove the outer tie rod. Not hard but an alignment check after would be recommended.
1-20 of 187 Results
Top