Subaru WRX Forum banner

Advice on how my WOT 3rd gear pull to redline looks

2K views 6 replies 3 participants last post by  LexusLSGuy 
#1 · (Edited)
Hoping some experts could chime in on how this WOT 3rd gear pull to redline looks? I'm a nob and I'm learning.

DAM stayed at 1 and feedback knock never went over then -1.41 Boost peaked at 21.8 psi.

Any advice on how she is running on this 93 octane tune?

Log File:

http://www.filedropper.com/wot3rdgearpull
 
#4 ·
Nothing jumps out at me besides the knock numbers. You'll need someone a little more comfortable with the numbers to give you something tighter. If no one chimes in I believe COBB will also give advice on your log.

Sent from my Nexus 6 using Tapatalk
 
#5 · (Edited)
#6 ·
Cut down your log in the future...

Too many parameters, too many lines. If you just want a general "everything look ok?" thing, you don't need 2/3 of that Excel file.

Boost / Boost Error / WDC
Ignition Timing / DAM / FLKC / FBKC
AFR Sensor / Learning / Correction
Engine Load
Throttle Angle

From there, we can notice any abnormalities, and can make suggestions for additional parameters to log to determine any issues.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top