over boosting datalogs. need some help
Results 1 to 1 of 1

This is a discussion on over boosting datalogs. need some help within the Tuning: Electronic Engine Management forums, part of the Tech & Modifying & General Repairs category; I have a 2006 sti. I have an accessport and have it pro tuned. The map I'm running should only ...

  1. #1
    Registered User
    Join Date
    Apr 2013
    Location
    pa
    Posts
    8

    over boosting datalogs. need some help

    I have a 2006 sti. I have an accessport and have it pro tuned. The map I'm running should only hit 15psi and the last couple days I've been hitting around 18 - 18.5. I seen on the one datalog there's a little bit of feedback knock. I'm not sure if I should get a manual boost controller or what. A couple weeks ago I did a couple datalogs and there was no knock and the boost was good around 15 psi. I haven't put any parts on since then or anything. Any help would be appreciated. Thanks guys
    Attached Files

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •