Need help on wheels fitment on wrx13
Results 1 to 2 of 2

This is a discussion on Need help on wheels fitment on wrx13 within the Suspension & Wheels forums, part of the Tech & Modifying & General Repairs category; I want to get one of these rims and will they fit my sedan wrx13? Currently have Tanabe lower spring ...

  1. #1
    Registered User
    Join Date
    Aug 2013

  2. Remove Advertisements

  3. #2
    Registered User mugentheman215's Avatar
    Join Date
    Apr 2013
    Mifflinburg, PA
    Anything other than 5x100 on the bolt pattern and you will need spacers so #2 is out if you don't wanna go that route. All the others have an offset of at least 42 and a tire width of 9 so with the spring rate on those Tanbe's you will almost certainly have to get some kind of fender rolling done. #4 will be a mild roll as that is what setup i am using currently but #1 and 3 will need a fairly decent roll and pull due to wheels size, width, and that much of an offset. So basically #2 is out unless you get spacers to fit 5x114.3, you will need rolling done no matter which you go with but #4 will require the least. Maybe some experts can weigh in but that's my 2 cents hope it helps! Sorry for wall of text.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts