gauging interest in front spherical sway end links

[wrx wagone]

i'm wondering what the benefits of spherical endlink are over a solid one other than how adjustable it is?

"Spherical" refers to the type of bearing used in the endlink, not the adjustability. The adjustability is there so you are not forced to preload the swaybar with fixed length endlinks.

[Big Sky WRX]

deflection- a bushing has x amount of deflection- obviously the softer the bushing the more deflection- a spherical bearing has little to no deflection allowing the sway bar to react instantaneous

and as you mentioned - adjustment for length- this allows any pre-load to be taken out

[Big Sky WRX]

^ beat me to the punch

last set is sold

[Yulri]

^ beat me to the punch

last set is sold

awww i just heard your definition which was enough for me to buy in pm me if you ever decide to make another although i doubt it

oh well I have also been on the fence about your other suspension goody but iffy on install of that one

[Big Sky WRX]

if the parts/pieces weren't so expensive it would be something I'd consider doing on an occasional basis, you can certainly finder cheaper rod ends and hardware- and maybe they would sufficient- I wanted to get quality bits and it ended up $

if your talking about the trailing links- it's a pretty easy install- good tutorial on nasioc w/ pics- basically a bolt off/bolt on

[Sasquatch]

Finally got 'em installed! I had to shorten them about 6 - 7mm for some reason. I used to get an occasional creak / knock from the OEM links after installing a 25mm Perrin bar. They knock no more.

[Big Sky WRX]

look good

mine have worked flawlessly thus far (knock on wood)

[Lipster]

Was the process of putting this all together too painful that you wouldn't do it again?

Looks great - and still working great? Piqued my interest... i'd like to try 'em.

[wrx wagone]

Was the process of putting this all together too painful that you wouldn't do it again?

Looks great - and still working great? Piqued my interest... i'd like to try 'em.

I actually would also be interested. My Poltec fronts are getting a bit worn out.

If you didn't want to do a round two, would you be willing to post up the parts list?

[Big Sky WRX]

I've been thinking about a round two- let me do a little digging I may have found a way to reduce the $ a little

[Lipster]

I've been thinking about a round two- let me do a little digging I may have found a way to reduce the $ a little

Sweeeeeeeeeeeet

[Sinister]

I've been thinking about a round two- let me do a little digging I may have found a way to reduce the $ a little

There are in the 30's or 40's of WRX forums out there.. I'll bet you can get quite an order going if you make the effort! That would surely reduce costs.

[ILikeToGoFast]

I'd be interested if there's a Round 2, let us know if you decide to go for it.

Cheers

-IL2GF

[kalidas]

I would definitely be in for a set if you decide to make more.

[Big Sky WRX]

well that's probably enough initial interest to look into a round 2