Stock BPV Install?
Results 1 to 11 of 11

This is a discussion on Stock BPV Install? within the Request a Tutorial/DIY forums, part of the Tutorials & DIY category; I was wondering if anyone could show me how to replace a BOV with the stock bpv. Ive had a ...

  1. #1
    Registered User wrx0131's Avatar
    Join Date
    Jul 2007
    Location
    Yonkers, NY
    Posts
    1,382

    Stock BPV Install?

    I was wondering if anyone could show me how to replace a BOV with the stock bpv. Ive had a HKS SSQV and I've been wanting to take it off but i never had the time and i didn't know what i was doing. Any help would be appreciated. Thanks

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User wrxisthebest's Avatar
    Join Date
    Jun 2007
    Location
    Angels Camp, CA
    Posts
    0
    its really simple.

    there are two bolts that go from the BOV to the tmic, take those out, and make sure u catch the gasket behind the BOV and infront of the tmic.

    disconnect the vacuum line from the bov.

    install the BPV onto the tmic and tighten down the two bolts.
    attach the vacuum line to the BPV.

    ur done!
    SPONSORS for Rally:AMSOIL, Livewire Energy, Six-feet deep clothing, ARS(Aluminum Rapid Shelters), and FatHeads Eyewear.

  4. #3
    Registered User wrx0131's Avatar
    Join Date
    Jul 2007
    Location
    Yonkers, NY
    Posts
    1,382
    Quote Originally Posted by wrxisthebest View Post
    its really simple.

    there are two bolts that go from the BOV to the tmic, take those out, and make sure u catch the gasket behind the BOV and infront of the tmic.

    disconnect the vacuum line from the bov.

    install the BPV onto the tmic and tighten down the two bolts.
    attach the vacuum line to the BPV.

    ur done!
    Thanks alot!

  5. #4
    Registered User DjTragik951's Avatar
    Join Date
    Jan 2008
    Location
    Rubidoux
    Posts
    25
    Quote Originally Posted by wrx0131 View Post
    Thanks alot!
    dont forget you also have that big hose that goes in the bottom of the stock bpv, that can be a ***** to connect, i had to remove the tmic to put the clamp.

  6. #5
    Registered User wrx0131's Avatar
    Join Date
    Jul 2007
    Location
    Yonkers, NY
    Posts
    1,382
    Quote Originally Posted by DjTragik951 View Post
    dont forget you also have that big hose that goes in the bottom of the stock bpv, that can be a ***** to connect, i had to remove the tmic to put the clamp.
    so i have to also remove the intercooler to get to the hose?

  7. #6
    Registered User DjTragik951's Avatar
    Join Date
    Jan 2008
    Location
    Rubidoux
    Posts
    25
    Quote Originally Posted by wrx0131 View Post
    so i have to also remove the intercooler to get to the hose?
    unless you have really small hands. but in my case it was the only way.

  8. #7
    Resident meany-rator 06wrx4me's Avatar
    Join Date
    Jun 2006
    Location
    Nor Cal
    Posts
    11,425
    I Support ClubWRX
    Quote Originally Posted by wrx0131 View Post
    so i have to also remove the intercooler to get to the hose?
    I did it without taking the IC on and off. No problem.
    2014 Ford Fiesta ST

    06 WRX, HAWKEYE # 001 <T-boned and sold>

    COILOVER TABLE
    TURBO TABLE

  9. #8
    Registered User wrxisthebest's Avatar
    Join Date
    Jun 2007
    Location
    Angels Camp, CA
    Posts
    0
    u dont have to!
    SPONSORS for Rally:AMSOIL, Livewire Energy, Six-feet deep clothing, ARS(Aluminum Rapid Shelters), and FatHeads Eyewear.

  10. #9
    Registered User wrx0131's Avatar
    Join Date
    Jul 2007
    Location
    Yonkers, NY
    Posts
    1,382
    thanks guys i will try tomorrow lol

  11. #10
    Registered User wrxisthebest's Avatar
    Join Date
    Jun 2007
    Location
    Angels Camp, CA
    Posts
    0
    Quote Originally Posted by wrx0131 View Post
    thanks guys i will try tomorrow lol
    dont worry bout it... it is incredibly simple to do!
    SPONSORS for Rally:AMSOIL, Livewire Energy, Six-feet deep clothing, ARS(Aluminum Rapid Shelters), and FatHeads Eyewear.

  12. #11
    Registered User wrx0131's Avatar
    Join Date
    Jul 2007
    Location
    Yonkers, NY
    Posts
    1,382
    well i replaced the hks bov with the stock bpv and the ride feels much smoother when i let off the gas....thanks alot guys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •