Blouch 16G-XT 7cm with braided oil feed line and up-pipe gasket! - SOLD!!!!!!!!!!!
DW 650cc injectors (with original flow sheet) - $SOLD!!!!!!!!!!!!!!!!!
This is a discussion on Blouch 16G-XT,DW 650cc injectors! within the Personal For Sale & Wanted forums, part of the ClubWRX.net Marketplace category; Blouch 16G-XT 7cm with braided oil feed line and up-pipe gasket! - SOLD!!!!!!!!!!! DW 650cc injectors (with original flow sheet) ...
PSI3 DATA ANALYZER!!!!!!!!with 1 DIN clock pod - $SOLD!!!
Monitor Boost pressure,intake air temp,coolant temp,engine speed,battery voltage,throttle position,road speed,ignition advance,airflow (g/s),lamda,knock correction,injector duration,time of day.....and with external sensors exhaust temp,oil temp and oil pressure! Also has "peak" for speed,boost,coolant and rpm and settable warning limits for boost,voltage (high/low), coolant and oil pressure! Also has a shift light and water injection control feature!!! Can read and clear OBDII Subaru specific SSM codes!
Last edited by Donkey; 10-18-2012 at 04:31 AM.
How much power were you making with this turbo?
Honestly never got around to getting numbers. I tune my own vehicle and alot of my logs got lost when my hard drive crashed. It is definitely on par with my old 18G which I was seeing around 320-330whp with my mods. Little bit less lag but better compressor efficiency. A great DD/street turbo. I might pull the hot side and do a little port/polish with a ceramic coating. Price would go up a little but the work would be much cheaper than sending it out.
Last edited by Donkey; 10-18-2012 at 04:38 AM.