Most forward flange does not meet up square to my down pipe even with 4 exhaust gaskets it still has a massive leak. (I have used this same DP on 4 other exhaust systems) The muffler is recess about 3in from the face of my rear bumper. Can not get the second exhaust hanger to match up at all to the rubber hanger on the car its welded roughly 2 inches to far back on the exhaust pipe. The muffler almost has a downward bend to it. Does not have any type of "JDM" upward angle.
On a good note it does sound very good, if it was not for the fitment issues or horrible angle of the muffler, or the fact it will eventually melt my bumper...it would be the best bang for the buck.