View Profile: wrxcomplex - ClubWRX Forum - Subaru Impreza WRX and STi Community and Forums
No More Results

1 Visitor Messages

  1. View Conversation
    What makes you so certain it's not just burning off? I'll believe you if you tell me, but just about EVERY exhaust part is going to burn off some smoke for a few minutes after install. If there's no oil anywhere to be found prior to the cylinders (i.e., TMIC, intake manifold, throttle body) then it has to be something in the cylinders or after it. Rogan advised you pull your spark plugs and take a look there...it's easier to do than dropping the whole intake manifold and will probably give you the same information. If they're bone dry I would basically move straight to the turbo. Check to make sure there isn't oil leaking from one of the banjo bolts...they're the brass colored bolts that screw into the center section of the turbo and have a hard oil feed/return line attached to them. They connect to the heads for their oil supply.

    If you remove the downpipe, where do you find oil? In the downpipe itself? Is it coming out of the turbine housing past the fan blades? A picture of the affected area taken in good light would help as far as having an idea of what's going on.

    If you went from a stock exhaust system to a fully catless system, you're definitely going to notice more smoke and stuff at startup...nature of the beast. If you had a pre-existing turbo problem, it would be WAY more obvious now that you don't have 2 stock catalyzers in the way soaking up the oil smoke that comes from the exhaust. I would probably double check all those things and if you still can't pinpoint a problem, make sure everything is assembled properly and take it for a 5 minute test drive. Keep an eye on your oil levels, if you're burning oil you don't want to inadvertently run out. For what it's worth, even if your turbo totally dies and seizes, so long as you don't run the motor out of oil or drive aggressively once this happens, it's unlikely you will blow your engine up. It is not unheard of for a stock turbo to get messed up and blow a seal. If you don't need the car right away and just want the peace of mind, you could uninstall the turbo and send it to Deadbolt for a full rebuild. www.boostplanet.com . While they have the turbo, they could do a port/polish/ceramic coating that would net some good gains in spool up/topend.

    All the best.
Showing Visitor Messages 1 to 1 of 1
About wrxcomplex

Basic Information

About wrxcomplex
Your Vehicle(s):
06 WRX
Location:
lafayette LA.
Estimated HP:
not sure. Maybe 260 I guess
Engine/Transmission mods:
spt intake,spt catback,Cobb AP stage 1
Suspension/Wheels mods:
N/A
Interior/Exterior/Accessories:
mom Nero pedals/momo nero shift nob
Future plans:
endure tech coilovers,Cobb sway bars front and back/ boost,oil,egt gauges/catless DP(Cobb)/17"x8" wheels???
Interests:
Electronic music(electo house & break beats) my family & cars.
Biography:
Very simple,don't need much. Love cars,kids,money,fiancé. I'm trying to learn as much about subies as I can. I was a former 7mgte owner.
Occupation:
I torque and test blowout preventers on offshore oil rigs
Approximate $ Spent Modifying Your Car:
1600$
Gender:
Male
Your Name:
Mike

Statistics


Total Posts
Total Posts
68
Posts Per Day
0.03
Visitor Messages
Total Messages
1
Most Recent Message
07-06-2008 01:35 PM
General Information
Last Activity
10-01-2008 09:11 AM
Join Date
02-29-2008
Referrals
1

1 Friend

  1. Black X Dahlia Black X Dahlia is offline

    Registered User

    Black X Dahlia
Showing Friends 1 to 1 of 1
iTrader Profile Recent Ratings
Feedback Score:
Positive Feedback:
0
0%
Members who left positive:
Members who left negative:
0
0
Total positive feedback: 0
Submit Feedback For wrxcomplex
View Complete Feedbacks for wrxcomplex
  Past
Month
Past
6 Months
Past
12 Months
  0 0 0
  0 0 0
  0 0 0