LinkBack URL
About LinkBacks
Reply With QuoteIt's an electrical issue. What mods do you have? What work did you do recently?
This is a discussion on Cel P1596 within the Maintenance, service, and repair forums, part of the Tutorials & DIY category; My Cel is on in my 2002 WRX and the code is P1596 Automatic transmission diagnosis input signal circuit high ...
My Cel is on in my 2002 WRX and the code is P1596 Automatic transmission diagnosis input signal circuit high input. The thing is that my car has a manual transmission, not an automatic. If anyone could give me suggestions on how to fix this problem it would be appreciated.
It's an electrical issue. What mods do you have? What work did you do recently?
WRX Info Links, Courtesy TheJ
I'm mixing the barley with the grape again. Rory Gallagher
Själen är större än världen. Ricky Bruch
Let the liquor do the thinking. Jim Lahey
DISCLAIMER: Opinions expressed are the author's alone and are inherently worthless.
I installed a cat-back exhaust two days ago. That is the only mod on the car.
Did you knock loose the electrical connector on the top of the gearbox near the bottom edge of the firewall?
WRX Info Links, Courtesy TheJ
I'm mixing the barley with the grape again. Rory Gallagher
Själen är större än världen. Ricky Bruch
Let the liquor do the thinking. Jim Lahey
DISCLAIMER: Opinions expressed are the author's alone and are inherently worthless.
I just bought the car a month ago and it looks like the previous owner hacked into that connector. So that is proably the problem. Thanks for the help.
OK great, at least that's a possible lead to the issue. Good luck.
WRX Info Links, Courtesy TheJ
I'm mixing the barley with the grape again. Rory Gallagher
Själen är större än världen. Ricky Bruch
Let the liquor do the thinking. Jim Lahey
DISCLAIMER: Opinions expressed are the author's alone and are inherently worthless.
Posting Permissions
Bookmarks