Need help with wiring (routing)
Results 1 to 2 of 2

This is a discussion on Need help with wiring (routing) within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; I have my Defi Control unit mounted close to the glove box and i'd like to move it to the ...

  1. #1
    Registered User
    Join Date
    Jun 2004
    Location
    NYC...too close to newark:(
    Posts
    423

    Need help with wiring (routing)

    I have my Defi Control unit mounted close to the glove box and i'd like to move it to the din slot under my radio. I removed the entirr bezel, cup holder and radio and I cant figure out how to run the wired in there, can anyone help me with this please. I don't see any openings for me to route my wiring and if you're unfamiliar with the defi there is like 5-6 sensor relays that have to be plugged into it so i do need a bit of room.

    Any help is greatly appreciated.
    In real life a man is not judged by his potential...he's judged by his accomplishments.....

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User 04blkWRX's Avatar
    Join Date
    Jul 2003
    Location
    NNJ
    Posts
    721
    Where are you running the wires? From the radio area to under the glovebox?

    I have my control unit in a single DIN as well and the sensor inputs come through under the glovebox. If you hold a flashlight under the glovebox, pointing out through the radio area (look into the empty DIN area) you should be able to see plenty of gaps to run wire. Tape the wire to a wire clothes hanger if you need help pushing it through.

    If i'm misunderstanding, add some more details - where your gauges are mounted, where the sensor wires come through and where you're getting power.
    06 S40 T5 AWD
    Previous: 2004 WRX
    05 CBR600F4i

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •