t-tap that comes with the blitz dcII

[WRXout]

i used the t-tap that came with the Blitz DCII the turbo timer with boost gauge, and i hookede it straight to my intake manifold and i was wondering if it gives accurate boost readings or do i have to get a bigger T? i zip tied it so no boost leaks, but is it accurate? thank you

[gusto]

i just installed mine a few weeks ago and it reads about 8 psi (.45-.5 hkpa) when my AP is reading between 14.5-15.7psi

highest booost on teh gauge so far has been .71, thats not even 14.5

kinda bummed but until i rig up a T connector for the BPV i dont plan on having accurate readings..

im NOT stoked on this either.

[WRXout]

i just installed mine a few weeks ago and it reads about 8 psi (.45-.5 hkpa) when my AP is reading between 14.5-15.7psi

highest booost on teh gauge so far has been .71, thats not even 14.5

kinda bummed but until i rig up a T connector for the BPV i dont plan on having accurate readings..

im NOT stoked on this either.

so what do i mate up to it? what kinda t tap?

[gusto]

tap the hose coming off the bpv/bov

check bottom page 3 on this link, shows a pic of hose you want to tap & joint. http://www.mattrandolph.com/wrx/Boost-gauge-install.pdf

edit: 1/4 x 1/4, 1/8 is the size of the splitter youll need.

ps: do a search n00b!