Autometer mech Oil Temp install ?'s
Results 1 to 3 of 3

This is a discussion on Autometer mech Oil Temp install ?'s within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; I just recieved my oil temp gauge and was wondering if the 1/2" mounting nut will fit in the gallery ...

  1. #1
    Registered User
    Join Date
    Mar 2004
    Posts
    123

    Autometer mech Oil Temp install ?'s

    I just recieved my oil temp gauge and was wondering if the 1/2" mounting nut will fit in the gallery plug locations or if I am going to have to drill into the pan? They also have a 3/8" adaptor if that works?
    2004 STi

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User Vette Dude's Avatar
    Join Date
    Apr 2003
    Location
    Houston USA
    Posts
    1,008
    subaru sales an adapter for the 3/8's i believe...
    Parts left off of a car cost nothing weigh nothing and do not cause service issues.

  4. #3
    Registered User cbr600f3's Avatar
    Join Date
    Apr 2004
    Posts
    369
    Just be careful when installing or you will have oil in the cabin. Lots of people go with electronic gauges for that very reason. Subaru does sell an oil galley plug and the part number is

    11024AA210. It should only be a couple of bucks and comes with plug and washer.

    Here is a linky to a pdf on the oil gallery locations
    www.chargedperformance.com/guides/ SubaruOilGallery.pdf

    Good Luck
    Last edited by cbr600f3; 10-20-2004 at 06:43 PM.
    04 Cayenne Red XT....b1tch.
    Cobb Stage 2 Protune on the way....
    Kartboy SS
    bling free since 1975

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •