boost gauge lighting wiring
Results 1 to 2 of 2

This is a discussion on boost gauge lighting wiring within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; What do I use to attach the lighting wire from the boost gauge to the fuse. See attached link. http://www.quantum-racing.com/Wire_Tap_WRX.htm ...

  1. #1
    Registered User
    Join Date
    Dec 2002
    Location
    Reynoldsburg, OH
    Posts
    18

    boost gauge lighting wiring

    What do I use to attach the lighting wire from the boost gauge to the fuse. See attached link.

    http://www.quantum-racing.com/Wire_Tap_WRX.htm

    In another post someone said I could wrap the bare wire around the fuse and then stick the fuse back in. Any thoughts?
    Last edited by gaewsky1; 07-03-2004 at 10:43 AM.
    2002 Silver WRX Wagon
    UTEC

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User wrxinfx's Avatar
    Join Date
    Mar 2004
    Location
    house
    Posts
    1,303
    Why tap directly into the fuse box. Pretty dangerous as i saw someone actually put the tap into the wrong end and when the unit fried, the fusebox didn't blow the fuse but just melted. I just wired the illumination wire from my electronic boost gauge to the illumm. wire in the back of the stereo. Yellow or orange.. can't remember. But everyone I know just use the wiring from the clock on the dash. There is a wiring schematic posted on this site from one of the mods. Try searching for boost gauge install and it should pop up.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •