Amplifier installation location
Results 1 to 6 of 6

This is a discussion on Amplifier installation location within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; I am going to upgrade the speakers all the way around and I want to buy a multi-channel amp for ...

  1. #1
    Registered User Stealththx's Avatar
    Join Date
    Feb 2004
    Location
    Channahon, Illinois
    Posts
    219

    Amplifier installation location

    I am going to upgrade the speakers all the way around and I want to buy a multi-channel amp for all 4 but I'm not sure where I can put it. I would like to put it in the trunk but how would I run the speaker wires in the other direction?

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User Th3Franz's Avatar
    Join Date
    May 2003
    Location
    Wisconsin
    Posts
    2,766
    I would try and put it underneath the front passenger seat. I think some people have had success by doing that.
    - F r a n z
    Bucky with teh lime powah!

  4. #3
    Registered User WRX-games's Avatar
    Join Date
    Oct 2003
    Location
    Arvada, CO
    Posts
    4,719
    Originally posted by Th3Franz
    I would try and put it underneath the front passenger seat. I think some people have had success by doing that.
    Yep Both my amps are under the front seats. Sub under the driver side and front components under the passenger side.
    James

    "Never criticize a man until you've walked a mile in his shoes. That way, if he doesn't like what you have to say, it'll be OK because you'll be a mile away and you'll have his shoes."

  5. #4
    Registered User Stealththx's Avatar
    Join Date
    Feb 2004
    Location
    Channahon, Illinois
    Posts
    219
    Won't that get wet underneath the seat? Do you bolt it to the floor also?

  6. #5
    Registered User kjw1949's Avatar
    Join Date
    Oct 2002
    Posts
    39
    I mounted my amp under the drivers seat on a piece of 3/4 mdf to keep it off the floor. I was just able to sqeeze a 4 channel amp under there and I don't have any heat problems

  7. #6
    Registered User WRX-games's Avatar
    Join Date
    Oct 2003
    Location
    Arvada, CO
    Posts
    4,719
    Originally posted by Stealththx
    Won't that get wet underneath the seat? Do you bolt it to the floor also?
    I have never experienced any water issues, but I haven't tried to tackle any lakes or bogs lately either

    I use self tapping screws to mount the amps. You can put nylon spacer sleeves around the screws if you want to raise the amps up off the floor board a bit. You can find the spacers at Ace or Home Depot.
    James

    "Never criticize a man until you've walked a mile in his shoes. That way, if he doesn't like what you have to say, it'll be OK because you'll be a mile away and you'll have his shoes."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •