Autometer bezel +OEM pod

[wrxlarc]

(Cut and pasted from my post on Nasioc)

Omori 2002 Impreza WRX Look Gauges

-52 mm Electrical EGT in Autometer Bezel
-52 mm Electrical Oil Pressure in Autometer Bezel
-45 mm Mechanical Boost in OEM Pod

NOTES: The bezel was somewhat of a pain to get in there with the OEM pod in the way. I did use the 2 brackets that came with the bezel, they worked fine. The OEM screws that go in the top of the bezel were replaced by 2 #10 screws because I replaced the clips that they screw into... I lost one of the originals when I took the OEM pod out. The clips were found at the local autoparts place and worked great. Finally I sanded up the pod a little and sprayed semi-gloss black over it.

The EGT is not plugged in yet, need the manifold tapped.

And yes the guages in the pod are slightly tilted to the left, heh heh, I'll have to reset them one of these days...


Close up


Driver View


Outside driver window


Passenger View

[Ludecrous]

I hope those gauges have memory or hold on them or you will go crosseyed !!

[Mat_Drinks]

As someone with a new WRX trying to figure out how many gauges I want to add and where to add them I must say I like your set up.

I like the TT mounting too, first time I've seen that... may have to use it myself.

[FFWRX]

Does it rub when you move the steering wheel up or down?