3 easy steps with pics to eliminate speaker vibration
Results 1 to 1 of 1

This is a discussion on 3 easy steps with pics to eliminate speaker vibration within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; Some have asked about vibration noise of aftermarket speakers against the inner door panel. I thought it might be easiest ...

  1. #1
    Registered User
    Join Date
    May 2003
    Location
    TUCSON, AZ, not east coast anymore :/
    Posts
    44

    3 easy steps with pics to eliminate speaker vibration

    Some have asked about vibration noise of aftermarket speakers against the inner door panel. I thought it might be easiest to just slap up 3 pictures than do a written description of a fix

    This is your stock door panel off the car. Notice the raise ring around the grill.


    5 min with Xacto per door


    Presto chango, you're done :banana:


    Vibration noise at high volume levels are now a thing of the past. If you are more adventurous you can cut down about another 1/8" of the honey comb grill. That will give you a bit more room to work with.

    The speakers that seem most prone are Infinity 60.5s. Or course this only pertains if you have them playing off of deck power and haven't run them through a secondary crossover to take out some of the mid bass(recommended with any speaker) Happy sound listening.
    Last edited by East Coast WRX; 08-21-2003 at 11:58 AM.
    03 grocery get'n wagon

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •