To WRXrumble/others

[Rob W]

I notice in WRXrumble's signature that he has a boost gauge, A/F, and EGT in the 'oem' gauge location. I assume this is meaning on top of the dash in the middle.

Does anyone know where he had this done - including those same guages? Or was it a DIY?

[GregFarz78]

Yea its the factory housing dremeled out some and a custom gauge face to fit 2 1/16" gauges. I forget where you get them at but I know some guy over on i-club.com is selling them they're nice quality too.

[WRXrumble]

GregFarz78 is right

I got the OEM pod for 70 bucks. Got the white face autometer
turbo, A/F, EGT 2 1/16 guages. I use the regular support post
vertically (need to drill a new hole on the post after cutting one side off now it looks like a L) and epoxy it to the pod with the guage attached. This way the the gauge doesn't move. Then I use thin plastic piece and trim it to fill the gap.

All you need is to cut a wide \___/ on the top (underside part ) and the guage will sit nicely. I will post some picture once the car is ready for some shots.

Good luck.

[Rob W]

Thanks for the help... I'm sure it looks great!

[GregFarz78]

Probably looks like this

http://community.webshots.com/photo/...0040qnQHlaKhlX