Radar Hardwire
Results 1 to 3 of 3

This is a discussion on Radar Hardwire within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; Hey guys I have looked through a few threads about how to hardwire a radar detector it seems there are ...

  1. #1
    Registered User
    Join Date
    Dec 2013
    Location
    Pensacola
    Posts
    13

    Radar Hardwire

    Hey guys I have looked through a few threads about how to hardwire a radar detector it seems there are a few ways tap into a few different places dome light or cig lighter. How did you guys do it with an add a fuse or splice right into the wire itself?

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Master Baiter EJ257's Avatar
    Join Date
    Aug 2007
    Location
    On a stream bank somewhere
    Posts
    19,722
    I Support ClubWRX
    I spliced directly into my DC power source (it isn't a cigarette lighter in my car), and ran the cable under the dash, up the A-Pillar, and along the headliner.
    2005 WRX STi (Mods | Virtual Dyno)

    Resident Tuner @ WTF Tuning, LLC

    "Never trust anything that bleeds for a week and lives ..."

    UNYSOC

  4. #3
    Registered User
    Join Date
    Jan 2013
    Location
    NE PA
    Posts
    71
    I tapped the dome light/sunroof area and then ran the power cord out of the front of the headliner where it meets the windshield. It's easy up there I found a screw for the ground and used a wire tap like this: for the power and it powers on and off with the car

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •