Click image for larger version.  Name: interior .jpg  Views: 24  Size: 54.1 KB  ID: 105758Click image for larger version.  Name: interior 2.jpg  Views: 24  Size: 49.1 KB  ID: 105759Click image for larger version.  Name: parts.jpg  Views: 24  Size: 64.0 KB  ID: 105760


Click image for larger version.  Name: seat 1.jpg  Views: 24  Size: 36.5 KB  ID: 105754Click image for larger version.  Name: seat 2.jpg  Views: 24  Size: 45.0 KB  ID: 105755Click image for larger version.  Name: seat 3.jpg  Views: 25  Size: 46.1 KB  ID: 105756Click image for larger version.  Name: sparco.jpg  Views: 24  Size: 37.6 KB  ID: 105757

OEM Seat assembly from my 2006 WRX TR weighed in at 43.5 pounds

The SPARCO bracket with YANAKA seats weighed 35.8 pounds

1) The seat sits a little TOO low for my liking. Before I do the drivers seat I have to search for some bushings or spacers to raise the seat about 3 inches or so or else I aint putting it in. I mean it!
2) The bolts are a real p.i.t.a. to put back in once they're out BUT at least the Bracket lines up perfect with the floor bolt holes; however... of COURSE the sliders that came with the seats did NOT.
3) I had a nice time doing geometry & algebra before I marked the spot to Drill properly measured & placed 3/8 holes through the Steel bracket. Yeah.. great.
4) I did have to cut out some rug from around the front bolts to get a better fit though. Also, I had to hit the Hardware store for 8 sets of grade 8 automotive bolts/washers/nuts to connect the bracket & sliders.

FYI.... the SPARCO bracket was ordered from Andy's Auto Sport Body Kits - Your Body Kit Superstore! on March 19th; it was NOT delivered to me until June 8th.
Thats 81 days later!!! Shop with Caution.

All in all... Im Happy with the final result.