Ok so I did a really stupid thing today. I was removing my seat to fix some rust on the brackets, and I cut some of the wiring in haste because I had already broken the tabs on the connector and could not get them apart. So my question; the farthest back harness (yellow) is the on that I cut. Inside there are two white wires- absolutely no difference in them. I can see on the seat side of the plug however that they are black and white. Is there any way to know which one I should connect to which and does it matter? I didn't want to just connect them in fear that it would set off an air bag. The vehicle is an 06 wrx limited with heated leather seats. Any help would be appreciated. Here is a picture for reference.