Installing amp and subs

[NdN Ninja]

I will be installing my amp and subs and am wondering where I can feed the power cable from the battery to the amp. On my last vehicle I used the firewall, is there one I could feed it through in the '04 wrx? Pics would help. Also, suggestion would be good for the ground cable as well.

[bikefreax]

I fed mine through the firewall. There is a grommet right above the pedals. As for the ground I went to the seat bolts.

[Thug Nasty]

+1 and +1. I think I used something like that for the ground.

[teflon_jones]

+2 and +2

[NdN Ninja]

I fed mine through the firewall. There is a grommet right above the pedals. As for the ground I went to the seat bolts.

Any chance of getting a picture?

[scoobyroo]

Just lift up the carpet and you'll find one.

[bluerex47]

don't even have to lift the carpet. My firewall hole had a little black piece over it (don't know the material, maybe a vinyl type covering with foam behind it). I just popped that out of the way then put a hole in the rubber grommet.

I don't have a pic, but crawl up under your clutch pedal, and you should see it looking you in the face.

As far as ground, I used a bolt that was in the trunk. Just make sure you strap down that sub box.

[NdN Ninja]

^ haha word up on the box bein strapped in

thanks for the help fellas