Help boost gauge install
Results 1 to 3 of 3

This is a discussion on Help boost gauge install within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; I am installing a Defi D-gauge mechanical boost gauge, and I don't know where to splice the white wire for ...

  1. #1
    Registered User
    Join Date
    Sep 2005
    Location
    CA
    Posts
    44

    Help boost gauge install

    I am installing a Defi D-gauge mechanical boost gauge, and I don't know where to splice the white wire for power. I have the A- pillar off and the bottom of the steering column is removed. I know it needs to be a 12v power source, and was thinking of splicing into the headlights but don?t know which wire to cut. I am also confused about how to get the vacuum line through the fire wall. Any tutorials, advice or pics would be much appreciated. I need some help

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User kevinh211's Avatar
    Join Date
    Jun 2004
    Location
    LI, NY
    Posts
    263
    04 STi Blue
    2005 - 279WHP 306WTQ 13.1@105
    2006 - FPGreen
    LISC# 17 LongIslandSubaruClub.com

  4. #3
    Registered User TheFugitiveMind's Avatar
    Join Date
    Jul 2005
    Location
    Ventura County,CA
    Posts
    707
    i used the harness from the stock boost gauge. its located with the radio harness. i used some spade connectors to plug the 12+ and the - it works like a charm!!! and it also dims!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •