02 WRX Window issues?
Results 1 to 3 of 3

This is a discussion on 02 WRX Window issues? within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; My driver side window isnt lining up with the seal, like a 1 inch gap between it and the door. ...

  1. #1
    Registered User
    Join Date
    Apr 2004
    Location
    Belleville, IL
    Posts
    23

    02 WRX Window issues?

    My driver side window isnt lining up with the seal, like a 1 inch gap between it and the door. I am thinking its loose inside somewhere not making it go up and down properly. Anyone elsde have these kind of issues?

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User
    Join Date
    Jan 2005
    Posts
    54
    Quote Originally Posted by Notyab
    My driver side window isnt lining up with the seal, like a 1 inch gap between it and the door. I am thinking its loose inside somewhere not making it go up and down properly. Anyone elsde have these kind of issues?
    Take the panel off and tighten the motor nuts, 7 or 10mm i think... its a common problem, dont use the window until you at least check that out... i did and spent a lot more time on it if i just popped the panel, tighten the screws and dabbed some loctite

  4. #3
    Registered User Rice Boi's Avatar
    Join Date
    Dec 2001
    Location
    WA
    Posts
    286
    its a common problem. My car had this issue, I took it to the dealership and they fixed it under warranty, If you are still under warranty they will fix it for free. They thought is was a loose bracket on my car but it was actually a poor assembly problem, the bracket was bent on mine, they added a reinforcement plate and it takes less than an hour.
    HKW

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •