Trouble finding a good ground.
Results 1 to 4 of 4

This is a discussion on Trouble finding a good ground. within the Interior Mods forums, part of the Tech & Modifying & General Repairs category; I have a 2005 Wrx Sedan and im having trouble finding a good ground for my amp. anyone have any ...

  1. #1
    Registered User
    Join Date
    Jun 2005
    Posts
    4

    Trouble finding a good ground.

    I have a 2005 Wrx Sedan and im having trouble finding a good ground for my amp. anyone have any tips please let me know. thanks.. so far i have tried... spare tire. Seat belt mount and the trunk latch. the seatbelt worked for about 2 days until i actually turned up the system loud and i guess it wasnt good enough cause it just turned off the amp

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User flabele's Avatar
    Join Date
    Jun 2005
    Location
    New Jersey
    Posts
    815
    Quote Originally Posted by shtyd80
    I have a 2005 Wrx Sedan and im having trouble finding a good ground for my amp. anyone have any tips please let me know. thanks.. so far i have tried... spare tire. Seat belt mount and the trunk latch. the seatbelt worked for about 2 days until i actually turned up the system loud and i guess it wasnt good enough cause it just turned off the amp
    I used the bolt to the driver seat. Worked for me...

  4. #3
    Registered User BlueCamel's Avatar
    Join Date
    May 2005
    Location
    Smithfield,RI
    Posts
    414
    some people like it under the driver or passenger seat. or even to attached to the rear seat at its back in the trunk

  5. #4
    Registered User
    Join Date
    May 2005
    Posts
    75
    What i did worked amazing! if your putting your amp in your trunk, what i did is i took otu the bottem rear seat. I unscrewed the seat belt bolt, and i took some very thick sand paper and sanded all around it, then i made sure that i had just torqued it back on, i had two infinite kappa perfect Vq12's hitting extremely hard, and it was a 1200 watt amp, so i never had a problem, you have to sand that area down though, bare metal will make it alot better... I guess my 4 gauge ground didnt hurt either... im me on aim if you need any more help..

    AIm = Mowambi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •