Exhaust gasket???
Results 1 to 4 of 4

This is a discussion on Exhaust gasket??? within the General Maintenance, Troubleshooting & Accidents. forums, part of the Tech & Modifying & General Repairs category; I need some info on where to get a new exhaust gasket for an MRT exhaust, where the downpipe meets ...

  1. #1
    Registered User DEADPOOL's Avatar
    Join Date
    Dec 2002
    Location
    Boca Raton, FL
    Posts
    2,079

    Exhaust gasket???

    I need some info on where to get a new exhaust gasket for an MRT exhaust, where the downpipe meets the modpipe. We took it off the other day and it was trashed.

    Would autozone etc carry these or do i have to go call MRT??

    Thanks,
    -John
    "Celebrate we will, for life is short but sweet for certain"-DMB

    Liquid - "yes sticky! hes a god now!"

    02 WRX now JDM V8 STI (too many mods for my own good)

  2. Remove Advertisements
    ClubWRX.net
    Advertisements
     

  3. #2
    Registered User tubbytreats's Avatar
    Join Date
    May 2003
    Posts
    909
    I believe any stock Subaru gasket will work. They are metal crush washer type and you should get new ones when doing an install of your exhaust.

    You can call your local dealer to find some, or http://www.subaruparts.com to find them.

    2002 WRX Mods:
    AP Stage2/93, ScoobySport Up, Dp, & Muffler, SS AutoChrome TMIC, Hawker PC680T Battery, Injen CAI, ACT Stage2 Clutch, Gruppe-S 13.8lb Flywheel, Mobil1 and Redline oil, NGK BKR7EIX plugs, Goodridge SS Lines, Motul RBF600, Hawk HPS pads, 35% 3M tint, Koji Headlight Mod, SilverStar Bulbs, Blaupunkt MP3000 headunit, Infinity BassLink Sub, Kenwood KFC-1689ie speakers (6.5"F / 5.25"R), Rota Downshift (Black), Yokohama AVS ES100 (225/45/17)

  4. #3
    Registered User DEADPOOL's Avatar
    Join Date
    Dec 2002
    Location
    Boca Raton, FL
    Posts
    2,079
    Great, thanks for the quick reply.

    Also im wondering if i should change my upipe gaskets and the downpipe/turbo gasket. The new engine has about 5000km on it. Also it is the twinscroll setup so i doubt the subaru dealer will have those gaskets.

    Thanks,
    -John
    "Celebrate we will, for life is short but sweet for certain"-DMB

    Liquid - "yes sticky! hes a god now!"

    02 WRX now JDM V8 STI (too many mods for my own good)

  5. #4
    Registered User tubbytreats's Avatar
    Join Date
    May 2003
    Posts
    909
    I'm not sure about the STI engine and turbo, but I'd say you should change the gaskets anytime you change exhaust parts.

    If you call up http://www.subaruparts.com , I'm sure they can help you find what you need. You could also try http://www.cobbtuning.com or PM "GOD" on this board and see if he can help ya.

    Hope this helps you find what you need.

    2002 WRX Mods:
    AP Stage2/93, ScoobySport Up, Dp, & Muffler, SS AutoChrome TMIC, Hawker PC680T Battery, Injen CAI, ACT Stage2 Clutch, Gruppe-S 13.8lb Flywheel, Mobil1 and Redline oil, NGK BKR7EIX plugs, Goodridge SS Lines, Motul RBF600, Hawk HPS pads, 35% 3M tint, Koji Headlight Mod, SilverStar Bulbs, Blaupunkt MP3000 headunit, Infinity BassLink Sub, Kenwood KFC-1689ie speakers (6.5"F / 5.25"R), Rota Downshift (Black), Yokohama AVS ES100 (225/45/17)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •