Hey Guys, I just swapped my injectors and turbo (VF34). When I start the car my check engine light goes on and when I scan it with my Cobb tuning access port I get this code:
p1094 - Tumble Generated Valve Signal 1 Circuit Malfunction (Open)
I can hear ticking coming from the right side of the engine and my idle is messed up.
now i checked the connection and made sure it was secuarly plugged in, and everything is ok.
I did this search and found this thread
This guy is throwing these codes
P1088 - Tumble Generated Valve Position Sensor 1 Circuit Low
P1090 - Tumble Generated Valve System 1 (valve Open)
He is having a problem with the sensor.. I am wondering if I am having the same basic problem.. Do i need to replace my sensor because i check the connection and everything is good.. i reset the ecu with cobb and disconnected the battery and im still throwing it.