Hey guys, I need some quick help. I recently replaced my battery because it finally died after 70K miles. However, even after a new Optima redtop, my 02 WRX still ran a little funny. It was hesitating and didn't always want to start. I decided to clean up the stock grounding points and do a little DIY grounding mod to see if that would help. Turns out, the grounding wire running to the engine wasn't even connected!!! Subaru must not have connected it when they changed my clutch at 40K miles. It's been like this for over 30K miles. I was more than a little pissed. Anyway, back on track.
I need to know where this wire is supposed to mount. The wire goes to a bracket and then the bracket must fit between a bolt and the block, but I don't know where. I really need your help on this one.